Menu
banner

Snap, crackle, and pop is something that you associate with a popular cereal brand. Snap, crackle, and pop…

4.9 RATING
4.9 RATING
4.9 RATING
Jun
30, 2021

Is Your Light Switch Making a Crackling Sound?

Snap, crackle, and pop is something that you associate with a popular cereal brand. Snap, crackle, and pop should never be associated with your light switches. If you notice that some of your lights switches are making a crackling sound once you turn them on, it’s a common sign that the switch is old and needs an upgrade. If you need help or advice from a certified electrician, Mr. Electric of Dallas is always here to help! 

The way your light works is it receives energy and electrical current through a continual flow of electricity. When the light switch is ‘on’ the electricity is flowing, and when the light switch is ‘off’, that flow is interrupted. 

If your light switches are making crackling noises when you turn them on, you are at risk for a fire hazard. There may be loose or bad connections somewhere in your electrical wiring, or there may be a lot of wear and tear on the wires from years of use. Our lighting fixtures are one of the most common things we use in our homes, so it’s no surprise they will need updating at some point. 

If you notice a crackling noise in any of your light switches when you turn them on, it’s probably time to switch the ground light switch. Here’s how to do it…

image

How to Update a Grounded Light Switch

Replacing a light switch is not the hardest thing to do, but if you aren’t familiar with electrical wiring, you may want to give the team at Mr. Electric of Dallas a call! 

Our Service

No matter the size or complexity of your residential or commercial project, you can count on us to provide professional, high-quality results.

image

Smoke Detector Replacement

For professional and cost-effective smoke detector replacement in Waxahachie, TX, rely on the qualified and experienced electricians at Mr. Electric. Our…

image

Pool Heater Installation

Are you tired of waiting until June or July to enjoy your swimming pool? If you want to get the most…

image

Electrical Troubleshooting

Dealing with electrical problems can be frustrating and challenging for busy families and businesses. At Mr. Electric of Dallas, we are…

image

Electrical Inspection

Has it been too long since your last appointment with a qualified electrician? Sometimes, damaged circuits, outdated wiring…

image

Smart Home System Installation

Are you looking for creative ways to decrease your monthly energy usage while improving the convenience and comfort of your living…

  1. Before doing anything, make sure you turn your power off at the breaker box to avoid any injury. Use a voltage tester to ensure everything is off.
  2. Grab a screwdriver and remove the light switch plate.
  3. Remove any screws that are holding the plate to the wall, and gently pull out the faulty switch and see what the current wiring status is.
  4. If your switch is older, it will have a loop around the terminal screws. Undo those loops if you have them.
  5. If your switch is newer, it may have a wire attached through holes on the backside of the switch. Remove these wires by inserting a small, flat screwdriver and gently pull them loose.
  6. Attach the black or red wire to the brass screw or through the holes on the same side of the brass screw
  7. Attach the white wire to the silver screws or through the corresponding holes.
  8. Attach the green or copper wires to the green screws on the switch or directly to the screw on the electrical box
  9. You will want to have at least ½ inch of wire on both your black, red, and white wires. Remove the casing from the wire.
  10. Attach the black and red wires to the new switch by twisting the bare wire into a clockwise loop around the brass screw and tightening it. 
  11. Follow the previous step with the white wire, attaching it and tightening the silver screw.
  12. Once all the wiring is complete, place the switch back onto the electrical box and secure it to the wall.
  13. Turn your power back on. If there is no more crackling, attach the switch plate to the wall. 

Recent Blog Posts & Updates.

469-634-0316
Jan 23, 2026

When an Electrical Inspection Is the Smartest Home Upgrade

Electrical inspections might not be something many of us think about every day, but they’re an integral part of maintaining electrical safety and efficiency. As seasoned electricians in Dallas, TX, we’ve seen firsthand the kind of problems associated with neglected electrical systems. Do not…

Read More
Jan 14, 2026

Is Upgrading Electrical Circuits Worth the Investment?

Electrical circuits are responsible for distributing power from the main panel to lights, outlets, and appliances. Upgrading electrical circuits may not be something you often think about. Just like electrical panels, circuits can last between 25 and 35 years. However, modern homes have increased power…

Read More
Jan 06, 2026

Keeping Your Business Running: Preventing Electrical Downtime

There’s a lot that goes into keeping a business running smoothly, and one of the overlooked elements is a reliable electrical system. Business downtime due to electrical failures can eat into your profits and erode customer trust. A preventive approach is key to keeping operations…

Read More
Jan 01, 2026

How a Generator Protects Your Home During Outages

When power goes out, everything in a home comes to a halt. All rooms plunge into darkness, air conditioning systems stop working, security cameras go off, and the fridge stops working. This highlights the importance of having a reliable backup source of power. You’ll be…

Read More